This tool is used to maintain correct alignment of the front axle while the axle nut is being tightened. The front axle must be aligned with the notch in the right hand fork leg in order to preserve access to the compression adjustment screw. The tool body is made from metric sized Aluminum 6061 T6 thick wall tubing with steel pins. Made in U.S.A. Shipping cost to the U.S. of A. is $2.25 via 1st Class Mail; please contact me for shipping rates outside of the U.S. of A..

This tool will work with Ducati 748, 916, 996, 998, 749, 999, ST2, ST3, ST4, 620SS, 800SS, 1000SS and other models that use a 25mm ID axle. Models equipped with Ohlins fork require a slightly modified tool; We can provide these as well; please contact us.

The SlimStand securely holds your motorcycles in a natural, riding-like stance using a unique through-the-axle pin design. Your motorcycles can’t fall off or be nudged off of the Slimstand; the axle pin keeps the stand attached to the motorcycle. This stand offers the smallest footprint available for a stable rear stand. The rear tire is located just a few tenths of an inch off of the ground. Perfect for achieving safe, close proximity storage of your bikes. No rear handle to trip over. The stand also positions the bike correctly to accurately check the oil level. Also great for positioning the bike to properly set the suspension sag. Requires a hollow rear axle for use (>5/8 inch ID) Axle width must be less than 14 inches.

Model MT-103 accepts rear swingarms up to 14 inches in width. The 14 inch version will fit the Ducati 999, 749, Multistrada, Monster 1000, S2R and any other model that has a hollow rear axle at least 5/8 inch in ID.

The stand is contructed from 1018 steel and features strong TIG weld joints. Powder coated in silver. Includes a plated steel axle pit pin. Shipping cost to the U.S. of A. is $22.95 (large box @ 20 lbs); please contact us for shipping rates outside of the U.S. of A.

This tool will aid in the safe removal of the left hand engine alternator cover on all modern belt driven 2V and 4V Ducati's (Monster, Multistrada, 600, 620, 748, 749, 750, 800, 851, 888, 900, 916, 996, 998, 999, 1000). As Ducati and service shops have switched to liquid sealeants, getting this cover removed without marring the sealing surfaces has gotten more difficult. This puller allows for controlled application of cover removal tension during the cover removal procedure. It makes removing the alternator cover to check that pesky alternator nut a breeze! This tool will work with the newer 5 bolt water pump covers and the 520 watt alternators as well. Shipping cost to the U.S. of A. is $5.25; please contact me for shipping rates outside of the U.S. of A..

The tool body is made from 1018 steel and comes with a grade 8.8 fine thread bolt. Made in U.S.A.

This tool is functionally equivalent to Ducati tool #887130144.

This tool will allow you to readily rotate the crankshaft using the two small keyways that can be accessed under the left hand engine alternator cover on all modern belt driven 2V and 4V Ducati's (Monster, Multistrada, 600, 620, 748, 749, 750, 800, 851, 888, 900, 916, 996, 998, 999, 1000). Invaluable for turning the engine over while setting the valve clearances. Shipping cost to the U.S. of A. is $5.25; please contact me for shipping rates outside of the U.S. of A.

The tool body is made from 4140 chromoly steel, has a black oxide finish, and comes with a grade 8.8 bolt. Made in U.S.A.

This tool is functionally equivalent to Ducati tool #887130123.

This tool enables you to keep the camshaft sprockets correclty aligned during installation of new cam belts. When you've got the timing marks lined up correctly, at least one of the cams will want to rotate out of position due to the closing spring (the vertical intake).

This tool can also be used to help remove the nut attaching the pulley to the camshaft. Simply install the tool with lobes on the camshaft with the nut to be removed. Use an appropriate spanner socket to remove the nut.

This tool will fit the 851, 888, 916 and 996 engines.

Shipping cost to the U.S. of A. is $5.25; please contact me for shipping rates outside of the U.S. of A.

The tool body is made from Al6061 and is precisely machined to very close tolerances to fit between the cams. Made in U.S.A.

This tool enables you to properly torque the 15 mm cylinder head nuts on all modern 2V and 4V Ducati's (Monster, Multistrada, 748, 749, 750, 851, 888, 900, 916, 996, 998, 999, 1000). Shipping cost to the U.S. of A. is $5.25; please contact me for shipping rates outside of the U.S. of A.

The tool body is made from 4140 chromoly steel, has a black oxide finish, and is precisely machined to very close tolerances on the 1/2 inch drive and the 12 point 15 mm closed end. Made in U.S.A.

This tool is functionally equivalent to Ducati tool #887130882.

This tool enables you to properly torque the 14 mm cylinder head nuts on the newer 4V Ducati's (600, 620, 848, 1098). Shipping cost to the U.S. of A. is $5.25; please contact me for shipping rates outside of the U.S. of A.

The tool body is made from 4140 chromoly steel, has a black oxide finish, and is precisely machined to very close tolerances on the 1/2 inch drive and the 12 point 14 mm closed end. Made in U.S.A.

This tool is functionally equivalent to Ducati tool #887130882.

Several folks have asked for an entire set of these tools and it just made sense to offer them as a package deal and give a discount to boot. This set includes a head nut torque tool for the 15 mm nuts. Note that the price of $115 includes shipping to the U.S. of A. Shipping outside of the U.S. usually adds about $5 to $10, use the contact from below to enquire about a specific country.

Several folks have asked for an entire set of these tools and it just made sense to offer them as a package deal and give a discount to boot. This set includes a head nut torque tool for the 14 mm nuts (newer models). Note that the price of $115 includes shipping to the U.S. of A. Shipping outside of the U.S. usually adds about $5 to $10, use the contact from below to enquire about a specific country.

To purchase one or more of these items, please use the "Buy Now" buttons which will take you to PayPal. MotoReva also accepts purchases through good old fashioned Postal Mail.

Shipping to the U.S. of A. is included in the amount that PayPal will require payment for (most tools ship for $5.25 in the states).

If you'd like to purchase multiple items, please contact us and we'll provide a reduced shipping rate.

If you live ouside of the U.S. of A., please contact us for additional info on shipping costs.

We do ship worldwide.

In addition, these items are normally on auction with eBay (search using seller = desmoduc) at the same prices shown on this website.